T.REX Triple Flap Placard
Video | What’s Included | Magazine Fitment | Specs | Pictures
The Triple Flap Placard is a scaled-down version of our Quad Flap Chest Rig. It shares the same pouch design as the Quad Flap, allowing the Triple Flap to fit a wide variety of magazines, from single 5.56 mags, Short Action AICS mags, AK74/47 mags, and even HK417/G28 mags. The Triple Flap also features adjustable ride height, multiple backstrap locations, and a Cordura backer for chest rig applications. It comes standard with all the necessary hardware, including 1″ ITW Buckles and G-Hooks, making this placard ready to clip into the plate carrier or chest rig harness of your choice right out of the box.
OVERVIEW VIDEO
WHAT’S INCLUDED
- 1x Triple Flap Placard
- 1x 8″ x 6″ Loop Backer
- 2x G-Hooks
- 2x 1″ ITW Male Buckles
- 4x 1″ ITW Female Buckles
MAGAZINE FITMENT
MAGAZINES
- 2x AR-15/M4 STANAG magazines
- 2x AR/M4 PMAGS, all generations
- 30rd 5.56×45 AK magazines (1x Flap Closed, 2x Flap Open)
- 30rd 5.45×39 AK magazines (1x Flap Closed, 2x Flap Open)
- 30rd 7.62×39 AK magazines (1x Flap Closed, 2x Flap Open)
- 1x 20/25 rd SR25, M14/M1A, or HK G3 7.62 Magazines
- 1x 10rd AICS Short-Action magazines
- 1x HK MR762/417 7.62 magazines (Not easy to reindex)
- 4x 30rd MP5 magazines
OTHER THINGS
- Water bottles
- Molotov cocktails (allegedly)
- Kestrel ballistics meter
- Smoke grenades
- Handheld rangefinders
- Reign
- Anything roughly the size of two 5.56 PMAGS
SPECS
FEATURES
- Extremely versatile pouch optimized for use with several different weapon platforms.
- Rear hook field and properly spaced buckles for attaching to industry standard plate carriers.
- Elastic webbing on the side of the mag pouches helps provide adequate retention for all magazine combinations, even single mags.
- Adjustable One-Wrap straps allow adjustable ride height and compatibility with various plate carriers.
- Stabilizing pass-through keeps the One-Wrap tight to the placard, which helps prevent tipping when loaded.
- The 8″ x 6″ rear hook field is optimized for the AC0, AC1, and AC1.5 but will work on most loop-based plate carriers.
- Three side loops for more adjustability.
Made in the USA.
TECHNICAL SPECIFICATIONS
| Weight | 9.5 oz. (270 g) |
| Overall Width | 9.5″ |
| Overall Height | Flap Tucked: 7″ Flap Untucked: 8.5″ |
| Rear Velcro Field (L x W) | 8″ x 6″ |
| Ride Height (Min-Max) | 1.75″ – 4″ |
PICTURES
